RO Water Purifier Solenoid Valve

RO Water Purifier Solenoid Valve

The BPV is a Solenoid Valve for RO Water Purifier Systems. This solenoid valve is a direct acting normally closed valve that isolates the tap water and opens when the system is actuated or in FLUSH mode. This is a 2/2 valve which means it has 2 ports and 2 flow positions. Put simply, this valve either blocks or opens water flow from 1 inlet to 1 outlet. They have prewired connections that make installation, maintenance, and control simple.

Water purification systems can help to eliminate contaminants that can make you sick or affect the taste or feel of your water supply.In a Reverse Osmosis (RO) water purifying system, reverse osmosis is utilized to dissolve inorganic solids (such as salts) and removes them from a solution (such as water). This is achieved by using the household water pressure to push tap water through a semi permeable membrane. The membrane (which is about as thick as cellophane) allows only the water to pass through, not the impurities or contaminates. These impurities and contaminates are flushed down the drain. These systems use a lot of water, but they do remove all microbes that cause disease and a lot of chemicals. This is an extremely effective system for purifying water.

Dimension & Data of RO Solenoid Valves:

Applications for RO Solenoid Valves:

1. Point of Use (POU) Drinking Water Systems
2. Home RO Systems
3. Commercial RO Systems
4. Point of Entry (POE) Water Filtration Systems
5. Office
6. Institutions
7. Lab
8. Water Purification
9. Ice Makers
10. Beverage Dispensing
11. Vending
12. R.V.

More RO Quick Fittings For you to choose:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!