NSE Pneumatic Flow Control Air Fittings 1/8'' 1/4'' 3/8'' 1/2''

NSE Pneumatic Flow Control Air Fittings 1/8'' 1/4'' 3/8'' 1/2''

Port mounted flow controls are ideal for adjusting the speed of extension and retraction for virtually any cylinder. Most double acting applications are best served with meter-out style flow controls which control the flow of exhaust as it leaves the cylinder. By reducing the exhaust air flow rate, the flow control reduces the speed of the cylinder rod travel. The finely threaded stem allows the gradual adjustment of controlled flow to match system requirements.

Features:
1. Compact size
2. Lightweight plastic body
3. Meter out functionality
4. Free flow in opposite direction
5. Knurled knob or screwdriver slot adjustment

Technical data of Pneumatic Hose Fittings:

Specifications of NSE Pneumatic Flow Control Fittings:

List of All Push To Connect Pneumatic Hose Fittings:

Choosing the Right Fittings for Your Pneumatic System:

Fittings help control the force and directional flow of compressed gas or air used in pneumatic systems. One of the first considerations in choosing a connector is the type of vessel that you will be connecting to such as the flexibility of the hose or tube, as well as the inner diameter (ID) and outer diameter (OD) of the vessel to ensure an adequate seal and secure connection. Fitting material choice for your pneumatic connector is also important, including gas compatibility or resistance to heat or corrosion.

Other considerations in choosing the right pneumatic system connector include:
1. Type of connection and the function it performs
2. Operational pressure of the pneumatic system
3. Operating temperature range
4. P.S.I. requirements for your application
5. Amount of vibration produced by the pneumatic system
6. Thread type of the receiving fitting

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!