 |
How to recycle refrigerant from industrial chiller First, how to recycle the refrigerant of the industrial chiller to the accumulator? The specific steps for recycling the refrigerant of the industrial chiller to the accumulator are: 1. Open all the valves of the industrial chiller refrigeration ... Read More
|
| |
There are many ways of dust removal, according to the principle of different can be generally divided into electrostatic dust removal, liquid dust removal, filter bag dust removal, now the application of the most is the bag filter and electric dust collector. At present, the research and development ... Read More
|
| |
Industrial dust collector equipment is a device that separates industrial dust from flue gas. The term is called industrial dust collector. The performance of an industrial dust collector is expressed by the amount of gas that can be treated, the resistance loss when the gas passes through the dust ... Read More
|
| |
Method for installing valve in industrial chiller refrigeration system In the refrigeration system of industrial chillers, the main function of the valve is to control the flow and direction of the refrigerant. In daily use, it is also necessary to use the valve frequently. When the industrial ... Read More
|
| |
Refrigeration system A. The main refrigeration system consists of: compressor, condenser, evaporator, expansion valve. Refrigeration auxiliary system consists of: liquid storage, drying filter, shut-off valve, sight glass, solenoid valve. Electrical control section Refrigerant controller: expansion ... Read More
|
| |
The initial operation of the bag filter is called the operation within two months after the start of operation. These two months are the period when the bag dust collector is most likely to have problems. It is necessary to solve the problems even if they are used, so as to ensure the stable ... Read More
|
| |
Firstly, we should consider four aspects when choosing this product: non-danger, reliability, applicability and economy. 1. Non-hazardous: corrosive medium: plastic wang solenoid valve and all stainless steel should be selected; The diaphragm type should be used for strongly corroded media. Neutral ... Read More
|
| |
The pulse solenoid valve is the actuator and key component of the pulse jet cleaning device, which is mainly divided into three types: Right Angle type, Embedded type and In Line type. The right angle pulse valve is characterized in that the valve air inlet and outlet pipe is at a right angle of 90°... Read More
|
| |
(1) bag dust collector negative pressure dust removal system in the negative pressure dust removal system, the dust collector is set before the ventilator. (its features are described below) (1) because the dust collector set in front of the fan, the gas has been through the fan dust, dust ... Read More
|
| |
The solenoid valve of the water-cooled system freezer is used for the switching control of liquid and gas pipelines. It is a two-DO control and is generally used for the control of small pipes. The electric valve is an analog adjustment for the flow of the medium in the liquid, gas and wind systems ... Read More
|
3'' DMF-Z-76S BFEC Diaphragm Pulse Jet Solenoid Valve For Bag Filter
CA25DD Goyen Type DD Series Pulse Jet Diaphragm Valve For Dust Collector
1'' SCG353A044 ASCO Type Diaphragm Pulse Jet Valve For Dust Removal
EVR 3 NC 032F8107 1/4'' Danfoss Type Refrigeration Solenoid Valve 220VAC
1028/3 Castel Type 3/8'' Refrigeration Solenoid Valve HM2 220VAC 230VAC
EVRA 40 EN-JS1025 Danfoss Type Ammonia Solenoid Valve 042H1128 042H1132
C113443 C113444 Diaphragm For ASCO Pulse Valve SCG353A043 SCG353A044
Diaphragm For BFEC Pulse Valve 1.5'' DMF-Z-40S DMF-ZM-40S DMF-Y-40S
K7600 K7601 Diaphragm Kit For Goyen Pulse Solenoid Valve CA76T CA76MM
