CNOMO Pneumatic Solenoid Valve 9mm Hole Diameter Magnetic Bobine

CNOMO Pneumatic Solenoid Valve 9mm Hole Diameter Magnetic Bobine

When using the solenoid valve coil, it is necessary to ensure that the coil product is very suitable for use, so that the entire solenoid valve device can exhibit a very optimized application effect. In order to purchase the coil products that are suitable for use, you need to ensure that the coils you purchase are suitable for the following aspects:

1. Appropriate specifications: When using the solenoid coil, you need to install it to the relevant part of the solenoid valve before you can start using it normally. And in order to complete the installation work of the coil normally, the coil must have a very suitable size in each part, and the corresponding size must have a corresponding product specification. Therefore, such a coil suitable for the specification is sufficient for everyone.

2. Appropriate voltage: When using solenoid valve equipment, the actual application conditions can meet different requirements in terms of voltage. Therefore, the solenoid valve coil that meets the actual voltage conditions in terms of applicable voltage is required. From this point of view, such a coil that is very suitable in terms of voltage is very suitable for everyone.

Technical parameter of FESTO Type 8029144 VACN-N-A1-1 Pilot Valve Solenoid coils:

Main dimension of AC220V/24VDC 9 diameter MD-2-24VDC-PA solenoid valve coils:

Production of 8029134 VACN-N-A1-16B/8029135 VACN-N-A1-3A Electromagnetic Valve Coils:

Application of 8029144 VACN-N-A1-1 MD-2-24VDC-PA Pneumatic Solenoid Coils:

Take care to avoid foreign matter entering the inside of the solenoid coils:

Although the solenoid valve coil is a component product that looks very simple in structure and is very convenient to use at the same time, as far as its application is concerned, it is still necessary for everyone to pay attention to avoid foreign matter entering the inside of the coil, so as to better protect the coil. Good application effects are presented.

The reason why everyone is required to use the solenoid valve coil, pay attention to avoid foreign matter entering the inside of the coil, because there is a gap between the coil and the internal solenoid valve structure part, so there is foreign matter such as some particles of impurities entering. may. Once too much impurities enter the inside of the coil, it should first come to the core to pick up the effect, and then make the coil in the application, because the current is too large, and the phenomenon of abnormal heating. In the case of abnormal long-term heating of the coil, the life of the coil itself will have a great adverse effect, which will make it necessary to replace the new coil in a short period of time to ensure the normal operation of the solenoid valve. use.

Therefore, in order to ensure that the solenoid valve coil has a normal use state, and to ensure that it can achieve a relatively long-term application, it is necessary to take care to avoid foreign matter entering the inside of the coil when using the coil.

Welcome to your inquiry!