6011 6012 Plunger Solenoid Valve BD-C DIN43650B Electrical Coil

The five main reasons why the solenoid valve does not work, have you encountered it?

In the common problems of solenoid valves, the problems that can not work normally after power-on are very common. So what is the problem? The following 5 reasons are for your reference:

1. The fluid pressure or the pressure difference of the task does not match. This will cause the solenoid valve to fail to work properly. The medium cannot pass. The working conditions of the solenoid valve cannot meet the practical working requirements and are not within the scope of the practical working environment.

Disposal method: Adjust the pressure or working pressure difference or change the appropriate product.

2. The valve core and the moving iron core are mixed with impurities and impurities. When the impurities enter the outside of the solenoid valve, the solenoid valve products will not work properly.

Disposal method: Stop the cleaning on the outside and install the filter valve before the valve.

3. Fluid viscosity or temperature does not fit, this is generally due to the wrong choice of the solenoid valve product model, perhaps the property of the media has changed.

Disposal method: Check the properties of the media, you can adjust the media properties to stop the adjustment, otherwise you need to change the appropriate products.

4. Before the valve filter or pilot valve hole infarction, this is also caused by too much impurities.

Disposal method: Invert the filter and pilot valve hole of the solenoid valve, and clean the filter or pilot valve hole. In addition, the medium reflecting the solenoid valve is required. Excessive impurities should be stopped in time.

5. When the task frequency is too high or the life is expired, the task frequency of too high will affect the normal operation of the solenoid valve. In addition, if the working time of the solenoid valve is too long and the life is expired, the solenoid valve will not work normally.

Disposal method: Reorganize the product model or change the new product. If the wrong operation and maintenance, maintenance and maintenance, will lead to the solenoid valve can not be used properly.

Welcome to your any question and inquiry!