Place of Origin: | China |
Brand Name: | Brando |
Certification: | CE |
Model Number: | 3A210-06 |
Minimum Order Quantity: | 1 pc |
---|---|
Packaging Details: | inner boxes,cartons,pallets |
Delivery Time: | 7 working days |
Payment Terms: | L/C, T/T, Western Union |
Supply Ability: | 100000 pcs per month |
Port Size: | 1/8 Inch | Valve Type: | Single Solenoid 3 Port 2 Position |
---|---|---|---|
Voltage: | 220VAC 110VAC 24VDC 12VDC | Working Pressure: | 0.15 To 0.8MPa(21-114psi) |
Temperature: | -20 To +70℃ | Max. Frequency: | 5 Cycle/sec |
Body Material: | Aluminum Alloy | Fluid: | Air (to Be Filtered By 40 μm Filter Element) |
Application: | Automation | CV: | 0.78 |
High Light: | 3A210-06 Air Pilot Valve,Exterior Control Air Pilot Valve,AirTAC Type 3A210-06 |
3A210-06 1/8'' 3 Position 2 Way Exterior Control Air Pilot Valve
Installation & Usage:
1.Before installing, be sure the valve hasn't been damaged via transportation.
2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3.Please notice whether the installation condition accords with technical requirements (such as“act-uation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6.Firstly press the base gasket into the base, and then connect the base with the valve body by the affiliated screws. The base gasket can be pressed into the installation places that are not used temporarily, and then seal them with affiliated blank cap. When the system expands, take the blank cap off and install relative air valves;
7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
Technical Data:
Model | 3A210-06 | 3A220-06 | 3A210-08 | 3A220-08 |
Fluid | Air(to be filtered by 40 μ m filter element) | |||
Acting | Exterior control | |||
Port Size | In=Out=1/8'' | In=Out=1/4'' | ||
CV | 0.78 | 0.89 | ||
Valve Type | 3 Port 2 Position | |||
Operating Pressure | 21~114psi(0.15~0.8MPa) | |||
Temperature | -20~70℃ | |||
Material of body | Alumium Alloy | |||
Max. frequency | 5 cycle/sec |
Dimension Diagram:
Brando Supply:
1.Solenoid Valve:
Pulse Jet Valve: Goyen Type Pulse Jet Valve, SBFEC Type Pulse Jet Valve, ASCO Type Pulse Jet Valve , Turbo Type Pulse Jet Valve.
Direct Acting Solenoid Valve:Brass Solenoid Valve, Stainless Steel Solenoid Valve, Plastic Solenoid Valve and etc.
Refrigeration Solenoid Valve:Castel Type Solenoid Valve, Danfoss Type Solenoid Valve.
2.Repair Kit:Solenoid Coil, Solenoid Armature/Stem, Diaphragm Repair Kit and etc.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Contact Person: Mia
Tel: +8613454729544
3'' DMF-Z-76S BFEC Diaphragm Pulse Jet Solenoid Valve For Bag Filter
CA25DD Goyen Type DD Series Pulse Jet Diaphragm Valve For Dust Collector
1'' SCG353A044 ASCO Type Diaphragm Pulse Jet Valve For Dust Removal
EVR 3 NC 032F8107 1/4'' Danfoss Type Refrigeration Solenoid Valve 220VAC
1028/3 Castel Type 3/8'' Refrigeration Solenoid Valve HM2 220VAC 230VAC
EVRA 40 EN-JS1025 Danfoss Type Ammonia Solenoid Valve 042H1128 042H1132
C113443 C113444 Diaphragm For ASCO Pulse Valve SCG353A043 SCG353A044
Diaphragm For BFEC Pulse Valve 1.5'' DMF-Z-40S DMF-ZM-40S DMF-Y-40S
K7600 K7601 Diaphragm Kit For Goyen Pulse Solenoid Valve CA76T CA76MM