Festo Type FRC Air Preparation FRL Unit Filter Regulator Lubricator

Festo Type FRC Air Preparation FRL Unit Filter Regulator Lubricator

An FRL unit is comprised of a filter (F), regulator (R), and a lubricator (L). They are often used as one unit to ensure clean air in a pneumatic system but can also be used individually. Having a proper FRL unit installed in a pneumatic system provides higher reliability of the components downstream, reduced power waste due to over pressurization, and increased component lifetime. The three components work together to do the following:

1. Filters remove water, dirt and other harmful debris from an air system. This is often the first step in improving the air quality.

2. Regulators adjust and control the air pressure of a system to ensure that down-line components do not exceed their maximum operating pressures. This is the second step in the FRL system.

3. Lubricators reduce the internal friction in tools or equipment by releasing a controlled mist of oil into the compressed air. This is often done last and/or right before the component needing lubrication.

Specification of FRC series Filter Regulator Lubricator:

Main Parts Material of FRC series Filter Regulator Lubricator:

Dimension of FRC series Filter Regulator Lubricator:

Other Pneumatic Products BRANDO supply:

2/2 Way Pneumatic Valves	3/2 Way Pneumatic Valves	5/2 Way Pneumatic Valves	5/3 Way Pneumatic Valves
Namur Solenoid Valves	Air Pilot Valves	Pneumatic Cylinders	Silencers and Fittings

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!