Send Message
Home ProductsPulse Jet Valve

Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve

Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve

  • Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve
  • Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve
Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve
Product Details:
Place of Origin: China
Brand Name: Brando
Certification: CE
Model Number: CA45T
Payment & Shipping Terms:
Minimum Order Quantity: 1 pc
Packaging Details: inner boxes,cartons,pallets
Delivery Time: 7 working days
Payment Terms: L/C, T/T, Western Union
Supply Ability: 100000 pcs per month
Contact Now
Detailed Product Description
Type: Right Angle Diaphragm Valve Power: Solenoid
Media: Air Port Size: 1-1/2''Inch
Structure: Diaphragm Body Material: Aluminum Alloy
Diaphragm Material: NBR(Common), FKM(Available) Number Of Diaphragm: 2
Pressure: 0.1 To 0.8MPa Temperature: -25 To +80℃
High Light:

CA45T Pulse Jet Valve

,

Dust Collector Pulse Jet Valve

,

CA45T Integral Pilot

Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve

 

Pulse jet valves common fault handling methods:

 

1.There is no installation of water, oil and sewage separation triple parts at the site. There is no sewage valve or sewage valve under the air bag has not been opened for a long time. Water and debris enter the valve, blocking small diaphragm air pins and small air outlets. As a result, the pulse solenoid valve cannot be turned off instantaneously, resulting in a "resonance phenomenon". The push rod was slammed and the diaphragm could not be reset normally.

 

Treatment: The quality of the compressed gas must be handled well: connect the freeze-drying, install the triple piece, install the automatic or manual drain valve in the air bag and manage and maintain it regularly. Then remove all diaphragms of the pulse solenoid valve, check if it has broken and need to be replaced, clean the internal piping of the pulse valve, or replace the entire pulse valve.

 

2.The pulse gap of the pulse solenoid valve is too frequent and the air bag capacity is too small, so that the residual pressure in the air bag after injection is too low, and the air supply pressure is insufficient. The last few valves in each air bag cannot be reset and leak.

 

Solution: Check the input of the pulse width of the pulse solenoid valve, and adjust the pulse width from 100ms to 200ms. Replace the solenoid pilot valve coil that has generated electromagnetic memory. Increase the air bag capacity according to the above improvement scheme. If it is not feasible, it is necessary to extend the blowing gap or increase the air bag pressure to ensure the speed of the air bag.

 

 

Technical Data of Goyen Pulse Jet Valve:

Model No
CA15T
CA20T
CA25T
CA35T
CA45T
CA50T
CA62T
CA76T
Nonimal size
φ15
φ20
φ25
φ35
φ45
φ50
φ62
φ76
Port Size
G1/2''
G3/4''
G1''
G1 1/4''
G1 1/2''
G2''
G2 1/2''
G3''
Working pressure
0.3-0.8MPa
Temp. range
-5℃ - 55℃
Relative humidity
≤85%
Working
medium
Compressed clean air
Service life
Over 1000000 times
Voltage
DC24V, AC24V, AC110V, AC220V


Main Dimension:

Goyen Type Right Angle 1.5'' Inch CA45T Dust Collector Pulse Jet Valve 0

 

CA RCA Series Pulse Jet Valve For Dust Collector System:

 

Thread Valve
1/2''
3/4''
1''
1.5''
1.5''
2''
2.5''
3''
CA15T
CA20T
CA25T
CA35T
(Single Diaphragm)
CA45T
(Double Diaphragm)
CA50T
CA62T
CA76T
Dresser Nut Valve
1''
1.5''
CA25DD
CA45DD
Flanged Valve
1.5'' Inlet
2'' Inlet
CA25FS
CA45FS
Immersion Valve
φ60 Outlet
φ75 Outlet
φ89 Outlet
φ86 Outlet
CA50MM
CA62MM
CA89MM
Remote Pilot Valve
1/8''
1''
1.5''
2''
RCA3D2
RCA25DD
RCA45T
RCA50T

 

Goyen Type Pulse Jet Valves:

1. Threaded Pulse Jet Valve: CA15T, CA20T, CA25T, CA35T, CA45T, CA50T, CA62T, CA76T
2. Dresser Nut Pulse Jet Valve: CA25DD, RCA25DD, CA45DD
3. Immersion Pulse Jet Valve: CA50MM, CA62MM, CA76MM, CA89MM
4. Flanged Pulse Jet Valve: CAC25FS, CAC45FS
5. Remote Pilot Pulse Jet Valve: RCA25DD, RCA20T, RCA45T, RCA50T, RCA62T

 

Focus on your demands, Offer you best solution:

 

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

 

Welcome to your any question and inquiry!

Contact Details
Ningbo Brando Hardware Co., Ltd

Contact Person: Mia

Tel: +8613454729544

Send your inquiry directly to us
Best Products
Other Products