4V210-08 1/4'' AirTAC Type Air Contrl Pneumatic Solenoid Valve For Automatic Making Machine
4V210-08 Pneumatic Directional Valve with Aluminum Alloy Body. 5 Position 2 way Pneumatic solenoid valve os na automatic basic element used to control fluids.By controlling the movement of the valve body to block or leak different oil discharge holes, and the oil inlet holes are always open, the hydraulic oil will enter different oil discharge pipes, and then pass through The pressure of the oil pushes the piston of the oil cylinder, which in turn drives the piston rod, which drives the mechanical device to move. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.
Youtube Video About 4V210-08 Internal Pilot Pneumatic Valve:
Technical Data:
Model
4V210-06
4V220-06
4V230C-06
4V230E-06
4V230P-06
4V210-08
4V220-08
4V230C-08
4V230E-08
4V230P-08
Fluid
Air(to be filtered by 40 μ m filter element)
Acting
Internal pilot or external pilot
Port Size
In=Out=Exhaust=1/8''
In=Out=1/4'' Exhaust=1/8''
Orifice Size
25.00 mm2 (Cv=0.78)
18.00 mm2 (Cv=0.67)
30.00 mm2 (Cv=0.89)
18.00 mm2 (Cv=0.67)
Valve Type
5 port 2 position
5 port 3 position
5 port 2 position
5 port 3 position
Operating Pressure
0.15~0.8MPa (21~114psi)
Proof Pressure
1.5MPa (215psi)
Temperature ℃
-20~70
Material of Body
Aluminum alloy
Max. frequency
5 cycle/sec
3 cycle/sec
5 cycle/sec
3 cycle/sec
Dimension :
Deconstruction:
Part Name
Material
Valve Body
Aluminum Alloy
Oring
NBR(common)
Seal
NBR(common)
Nut
Carbon Steel
Spool Spring
Stainless Steel
Connector
Engineering plastic
Details:
Automatic Medical mask making machine using 4V220-08 5/2 way pneumatic cylinder valve:
It can automatically complete multiple processes from feeding, to one-time forming, cutting and returning. Compared with traditional manual feeding, returning and cutting. The operation is simple and fast, and can be used by a single person and single machine. . Greatly improved production efficiency.
The slicer mainly uses the principle of ultrasonic cutting and automatic welding and edge sealing to complete the special-shaped cutting and welding of the slice. This machine solves the disadvantages of traditional lace machines such as inaccurate positioning, inaccurate size control, low production efficiency and high labor costs. It integrates many processes, such as unwinding, roller pulling, ultrasonic cutting, waste separation, and finished product slicing, which greatly improves production efficiency, reduces production costs, and makes products more standardized, more stable in quality, and more beautiful in appearance.
The mask edge cutting machine is mainly a machine that uses the principles of ultrasonic welding and automatic edge sealing to complete the welding and punching process of the edge of the cup mask. The operation is simple and convenient, and it can be used by a single person and a single machine. Only workers need to put and take materials, which can greatly save labor and make the production of cup masks simpler and faster.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Your message must be between 20-3,000 characters!
