|Place of Origin:||China|
|Minimum Order Quantity:||1 pc|
|Packaging Details:||Bubble bag, inner box, carton, pallet|
|Delivery Time:||Have inventory|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||2000 pcs per day|
|Standard Voltages:||AC(~) 24 V-115 V-230 V/50 Hz||Core Tube:||Stainless 305SS|
|Core And Plugnut:||Stainless 430FSS||Spring:||Stainless 302SS|
|Shading Ring:||Copper||Core Tube OD:||14mm|
430FSS Core Tube / Core / Plugnut Repair Kits for ASCO 2 / 2 Pulse Valve SCG353A047 SCG353A051
Non-magnetic core tubes are used to isolate the fluid from the coil. The core tube encloses the plugnut, the core spring, and the core. The coil slips over the core tube; a retaining clip engages the depression near the closed end of the core tube and holds the coil on the core tube.
The core or plunger is the magnetic component that moves when the solenoid is energized. The core is coaxial with the solenoid. The core's movement will make or break the seals that control the movement of the fluid. When the coil is not energized, springs will hold the core in its normal position.
The plugnut is also coaxial.
The core tube contains and guides the core. It also retains the plugnut and may seal the fluid. To optimize the movement of the core, the core tube needs to be nonmagnetic. If the core tube were magnetic, then it would offer a shunt path for the field lines. In some designs, the core tube is an enclosed metal shell produced by deep drawing. Such a design simplifies the sealing problems because the fluid cannot escape from the enclosure, but the design also increases the magnetic path resistance because the magnetic path must traverse the thickness of the core tube twice: once near the plugnut and once near the core. In some other designs, the core tube is not closed but rather an open tube that slips over one end of the plugnut. To retain the plugnut, the tube might be crimped to the plugnut. An O-ring seal between the tube and the plugnut will prevent the fluid from escaping.
The solenoid coil consists of many turns of copper wire that surround the core tube and induce the movement of the core. The coil is often encapsulated in epoxy. The coil also has an iron frame that provides a low magnetic path resistance.
Illustration of positions that Core tube , core, plugnut and spring installed at solenoid valve or pulse valve:
Applications of core tube BAPC214041405, used as repair kits for ASCO pulse valve core below:
|G- Threadedpipe joint|
Overall dimensions of Core Tube / Core and Plugnut for ASCO pulse valve:
Retaining clip (a.k.a. coil clip)
Solenoid coil (with magnetic return path)
Core tube (a.k.a. armature tube, plunger tube, solenoid valve tube, sleeve, guide assembly)
Plugnut (a.k.a. fixed core)
Shading coil (a.k.a. shading ring)
Core spring (a.k.a. counter spring)
Core (a.k.a. plunger, armature)
Solenoid Valve Common Uses:
Solenoid valves are used in fluid power pneumatic and hydraulic systems, to control cylinders, fluid power motors or larger industrial valves. Automatic irrigation sprinkler systems also use solenoid valves with an automatic controller. Domestic washing machines and dishwashers use solenoid valves to control water entry into the machine. They are also often used in paintball gun triggers to actuate the CO2 hammer valve. Solenoid valves are usually referred to simply as "solenoids."
Solenoid valves can be used for a wide array of industrial applications, including general on-off control, calibration and test stands, pilot plant control loops, process control systems, and various original equipment manufacturer applications.
More Core Tube / Core and Plugnut we have, welcome to send us any questions, also we can produce as customized:
Our working shop of Core Tube, Armature Tube, Plunger Tube, Solenoid Valve Tube, Sleeve, Guide Assembly, Core, Plugnut, Fixed core:
Contact Person: Brandon