|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 pc|
|Payment Terms:||L/C, D/A, Western Union, T/T, MoneyGram|
|Supply Ability:||6666 pcs per month|
|Material:||Aluminum||Port Szie:||1 Inch|
|Diaphragm:||NBR||Voltage:||AC110V DC24V AC220V|
solenoid pulse valve,
pulse solenoid valve
1 Inch Thread Pulse Valve CA25DD Aluminum Solenoid Valve with NBR Diaphragm
The CA25DD pulse valve is threaded connection and the angle between the inlet and outlet is 90 degrees.The electromagnetic pulse valve is the compressed air "switch" of the pulse bag type dust collector cleaning system, which is mainly used in the environmental dust removal industry.
We also have other size of pulse valve,if you have more necessary,you can contact us.
|Working medium||Clear Air|
|Ambient Temperature||for -5~50°C|
|Diaphragm material||NBR(Nitrile) or VITON (NBR for -5~80°C; VITON for -5~230°C)|
|Diaphragm life cycles||can work more than 1 million cycles|
|Spring material||stainless steel|
|Body material||die-cast aluminium|
|Type||Orifice Size||Port Size||Number of Diaphragm||Kv/Cv|
For safety reasons, it is absolutely not possible to deliver air pressure to the air bag before all valves are securely mounted on the air bag. Never attempt to disassemble a valve that has been installed firmly in the presence of air pressure in the system.
(1) Pair the appropriate blowpipes and mountings according to the valve instructions and try to avoid flipping the valve to the bottom of the air bag.
(2) Ensure that the air bag and the blow tube are clean and free of debris.
(3) Make sure that the compressed air supply is clean and dry.
(4) Install the valve on the short pipe on the welding air bag, and then connect the blowing pipe to the valve outlet to ensure that no excessive thread sealant is squeezed into the valve.
(5)Provide a moderate air pressure to the air bag system and check for leaks (you can brush soapy water and check the interface for air bubbles).
(6)The system is pressure-inflated (the pressure range of the valve is 0.3-8.6 bar), and it is recommended to inflate the air bag with a maximum pressure of 8 kg.
(7)Test the injection sequence of the pulse valve, and test whether all the pilot valves are operating normally and whether the pulse blowing sound is crisp.
Ensure that all system components are fully relieved and power is cut off prior to system maintenance. The power can be turned on until the valve and all components have been completely installed, increasing the air pressure. The diaphragm and solenoid pilot valve should be routinely inspected every year to keep it intact.
Our company also provide solenoid valve armature and solenoid diaphragm.if you need,contact us.
please care the products details at our website, any confuse please contact us or Note your request online. Big quantity purchase ,please contact our online service to ask more economic shipping way or discuss the more pretty price.
Welcome our inquiry!
Contact Person: Brandon