2" Submerged Dust Collector Valves / Stainless Steel Solenoid Pulse Valve DMF-Y-50S

Nitrile 2" valve diaphragm/Submerged Stainless Steel Pneumatic Pulse Valve DMF-Y-50S

The submerged electromagnetic pulse valve seat is installed in the air bag, with low resistance, good flowability, high injection volume, good running effect, stable performance, easy maintenance, long service life, increased load driving capacity and increased air source pressure. The scope of use is more suitable for use in low-pressure applications.

DMF-Y Specifiation

Model: DMF-Y-50S

Working pressure: 0.3-0.8MPa

Ambient temperature: -5-55℃

Relative humidity: ∠85%

Working medium: Clean air

Voltage: AC110V/AC220V/DC24V

Diaphragm life: over 1 million cycles

Dimensional drawing of DMF-Y

Environmental requirements

The electromagnetic pulse valve of the pulse dust collector cleaning unit should strictly abide by the environmental requirements, and the electromagnetic pulse valve can not normally and smoothly run the electromagnetic pulse valve environmental conditions:

1. According to the type of power supply, AC and DC solenoid valves are used respectively. Generally speaking, AC power supply is convenient to use.

2. In the environment where the relative humidity is high and there are water droplets and rain, etc., the waterproof solenoid valve should be selected.

3. In the corrosive or explosive environment, the corrosion-resistant solenoid valve should be selected according to the safety requirements.

4, the power supply conditions of the electromagnetic pulse valve.

5, power supply voltage fluctuations usually use +%10%.-15% AC, DC allow ±%10 or so, if excessive, must take pressure measures or put forward special order requirements.

6, the environment often has vibration, bumps and impacts, etc. should choose special varieties, such as marine solenoid valves.

7, the highest and lowest temperature of the environment should be selected within the allowable range, if there is a tolerance, special orders should be made.

8. The rated current and power consumption should be selected according to the power supply capacity. It should be noted that the VA value is higher when the AC starts, and the indirect guided electromagnetic pulse valve should be preferred when the capacity is insufficient.

9. If the environmental space is limited, please use the multi-function solenoid valve, because it eliminates the bypass and three manual valves and is convenient for online maintenance.

10, the voltage specification should be used as much as possible AC220V, DC24V.

please care the products details at our website, any confuse please contact us or Note your request online. Big quantity purchase ,please contact our online service to ask more economic shipping way or discuss the more pretty price.

Welcome your inquiry!