13mm OD Electromagnetic Valve 2 Way Normally Closed Armature Plunger Tube

13mm OD Electromagnetic Valve 2 Way Normally Closed Armature Plunger Tube

The solenoid armature plunger is the pressure-tight internal part of a solenoid valve. BRANDO produces its components from round material in brass, as well as from stainless steel using diverse alloys. The selection of the sealing material (elastomer) is always based on the operating and ambient conditions of the application.

The standard seals used are made of FKM. NBR, HNBR, MVQ, EPDM and FFKM are available on request. Hard-sealing materials such as PTFE are available for process technology applications. This expands the range of applications to include a variety of media for lower and higher temperature ranges. Sealing materials suitable for oxygen or other aggressive gaseous media are available on request.

Technical Data: 

Main Dimension: 

Our Production: 

More Solenoid Valve Armature Assembly for you to choose:

*According to tube OD: 5-7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, Up to 60mm.

*According to tube material: Brass, Stainless Steel

*According to valve application:

1. Pulse Solenoid Valve Armature Assembly, 2. Water Solenoid Valve Armature Assembly, 3. Pneumatic Solenoid Valve Armature Assembly, 4. Refrigeration Solenoid Valve Armature Assembly, 5. Injector Rail Armature Assembly, 6. Air-Jet Loom Solenoid Valve Armature Assembly, 7. House Appliances Solenoid Valve Armature Assembly, 8. Automobile Solenoid Valve Armature Assembly, 9. Medical Solenoid Valve Armature Assembly, etc.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!