AMISCO DIN43650 Form A EVI 3P/16 Hydraulic Valve Electrical Coil

 AMISCO DIN43650 Form A EVI 3P/16 Hydraulic Valve Electrical Coil

This Amisco Type EVI 3P/16 coil is widely used in hydraulic check valves. Check valves are used in hydraulic systems to prevent reverse flow of oil flow or in pneumatic systems to prevent reverse flow of compressed air. The pilot operated check valve is also called a lock valve or a pressure maintaining valve. It is the same as the check valve to prevent reverse flow of oil. However, when the oil flow needs to flow in the opposite direction in the hydraulic circuit, the control oil pressure can be utilized to open the check valve so that the oil flow can flow in both directions. The pilot operated check valve uses a conical spool, so the sealing performance is good. When a closed oil circuit is required, this valve can be used as a one-way locking of the oil passage to maintain the pressure. The hydraulic control check valve controls the leakage of oil in the form of internal leakage and external leakage. The internal venting type can be used in the oil passage with no back pressure at the reverse flow of the oil flow; otherwise, the external venting type is required to reduce the control oil pressure.

Technical data of AMISCO Type 3P/16 Hydraulic Solenoid Coils:

Overall dimension of Solenoid Coils:

Detail enlargement of EVI 3P/16 electromagnetic Valve Coils:

Brando offers a wide range of solenoid valve coils, which designed into various types, mainly features encapsulated coils, including thermoplastic and thermosetting. Our coils have the characteristics of High Performance, High Reliability and Long Service Life, can be used for Different Applications. We also provide excellent Customized Service.

Solenoid Coil Main Features:

1. Heat resistant bobbin moulded with thermoplastic polyester material;
2. High quality Enameled copper wire, F, H, N different insulation class for choose;
3. Built-in magnetic yoke, made by low carbon iron;
4. Encapsulation with high quality specially designed thermosetting & thermoplastic material.

Solenoid Coil Main Structure:

The conventional structure of a solenoid valve coil includes: Framework, Enameled copper wire, PIN, Yoke and Encapsulation. In addition, according to the actual use, there will be a magnetizing guide ring, a rectifier bridge be used for rectifying, etc.

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!