G1/2" NC Nitrile Diaphragm Stainless Steel 2S160-15 SUW-15 Uni-D Type Solenoid Valve AC220V

G1/2'' NC Nitrile Diaphragm Stainless Steel 2S160-15 SUW-15 Uni-d Type Solenoid Valve AC220V

PRODUCT DESCRIPTION:
1. SUW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve;

2. Orifice size from 2.5 to 50mm, and port size from 1/8'' to 2'';

3. The pipe connection could be G, NPT, BSP, PT;
4. Able to be operated directly under low pressure;
5. Availability of fluid type:water, air, light oil, gas, vacuum;
6. Acceptable for customization Viton (130℃) , Silicone (130℃) and EPDM (130℃) for plug and diaphragm.

Youtube video of 1/2'' 2S160-15 SUW-15 UNID Type Solenoid Diaphragm Valve:

Main dimension of G1/2'' 2S160-15 Semi-direct Diaphragm Operated Solenoid Valve:

Technical parameters of SUS & SUW NBR Diaphragm Unid Type Solenoid Valve:

Details display of SUW-15 Nitrile Diaphragm Operated Electromagnetic Valve:

Application examples of 2S, SUS & SUW Seies Stainless Steel Solenoid Valve:

CAUTIONS:
1. Before pipelining, the pipe line must be very clean without any contaminants or any other things not ought to be existed.
2. To prolong the life time of the product, Y-line filter should be installed in the front end of solenoid valve.
3. AC voltage tolerance:±10%；DC voltage tolerance:±1%
4. It should be installed horizontally；vertical installation is not advisable.

Not Suitalbe For Fluid As Below:
1. Liquid status when it is high temperature；solid status when it is cool.
2. Corrosive fluid
3. Viscosity over 20cst

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!