Pneumatic Valve Part Three way Two Position 55.0mm Tube Height Solenoid Stem

Pneumatic Valve Part Three way Two Position 55.0mm Tube Height Solenoid Stem

The manufacture process

1.Make the drawing in the computer

2.Then send the drawing to customers to check the dimension

3.Design the process of manufacture in the numerical control technology table

4.Make the sample one or two pieces.

5.Quality test by the inspectors,tested by pressure/temperture/corrosion-resistance/Stability,etc.Ensure the high precision and accuracy

6.Send the sample and drawing to the customers again,make the confirmation

7.With no mistakens,start to manufacture largely.After manufacturing,checking quality again and wash each piece to have a beautiful appearance

8.Delivery the items to customer with 5-8 work days

9.Once received products,please check there is no mistaken in products

10.If there is anything wrong with our items,contact us immediately.And after checking the mistaken,we will compensate amount of money or redeliverying the items for you

What Specification is

With more dimension in the picture

Unique aspects

1.SS304 material

SS304:304 stainless steel is a common stainless steel material, 7.93 g/cm 3 density, also known as 18/8 stainless steel industry. High temperature resistance , with good processing performance, high toughness characteristics, widely used in industrial and furniture decoration industry and food and medical industry.

2.3/2 way solenoid stem/solenoid armature with three ports and two positons

3.O-Ring improve the Sealing property and 100% resistance to air leakage.An O-ring seal between the tube and the plugnut will prevent the fluid from escaping.

O-Ring: a kind of rubber sealing ring with circular cross-section. Because the cross-section of O.so it is called O-rings,.It began to appear in the middle of nineteenth Century when it was used as a sealing element for steam turbine cylinders.

Advantages of O-Ring:low price, simple manufacture, reliable function and simple installation requirements

O-ring is the most common mechanical design for sealing. The O ring bears the pressure of tens of millions of Pascal (1000 pounds). O-rings can be used in static applications, as well as in dynamic applications where parts move relative to each other, such as the shaft of a rotary pump and the piston of a hydraulic cylinder.

4.Operated plunger,has two part:one movable core stall the spring,another install the NBR seal

5.There are two grooves in each part of the plunger

The Factory show

Tidy environment with advanded technology/well-trained employee

If you are interesed in our products or want to buy, welcome your contact and you can ask any questions you want to know.