|Place of Origin:||China|
|Minimum Order Quantity:||1 pc|
|Packaging Details:||inner boxes,cartons,pallets|
|Delivery Time:||7 working days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||100000pcs per month|
|In & Out Size:||1/4''||Exhaust Size:||1/8''|
|Valve Type:||5/2 Way Single Solenoid Valve||Power:||Pneumatic|
|Temperature ::||-20 To +70℃||Max. Frequency:||5 Cycle/sec|
|Application:||Automation (Medical Mask Machine)||Voltage:||220VAC, 110VAC, 24VDC, 12VDC|
cylinder operated valve,
cylinder solenoid valve
AirTAC Type 4V210-08 1/4'' NPT 5/2 Way Pneumatic Solenoid Air Valve For Automatic Face Making Machine
4V210-08 Pneumatic air control valve. Meet a wide range of requirements, such as medical use, food processing, dusty environments, explosive environments etc. So pneumatic 5/2-way valves are available in uncountable design variations with regards to size, material, color, connection interfaces, etc.
Automation machine can increased throughput or productivity; increased consistency of output; reduced direct human labor costs and expenses; Can complete tasks where a high degree of accuracy is required.
Youtube Video of 4V210-08 Pneumatic Solenoid Valve:
Dimemsion of 4V210-08 Pneumatic Cylinder Valve:
Deconstruction of 4V210-08 Automation parts:
Details About 4V210-08 Pneumatic Pilot Valve:
Installation & Usage:
1.Before installing, be sure the valve hasn't been damaged via transportation.
2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3.Please notice whether the installation condition accords with technical requirements (such as“act-uation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6.Firstly press the base gasket into the base, and then connect the base with the valve body by the affiliated screws. The base gasket can be pressed into the installation places that are not used temporarily, and then seal them with affiliated blank cap. When the system expands, take the blank cap off and install relative air valves;
7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Contact Person: Brandon