Home ProductsPneumatic Air Cylinders

Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke

Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke

  • Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke
Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke
Product Details:
Place of Origin: Ningbo, China
Brand Name: BRANDO
Certification: CE, ISO
Model Number: SI
Payment & Shipping Terms:
Minimum Order Quantity: 1 pc
Price: Negotiation
Packaging Details: Inner Box, Carton, Pallet
Delivery Time: 4-7 work days
Payment Terms: L/C, T/T, PayPal, Western Union, MoneyGram
Supply Ability: 100000 pcs per month
Contact Now
Detailed Product Description
Product Series: SI Bore Size (mm): 32, 40, 50, 63, 80, 100, 125, 160, 200
Standard Stroke (mm): 25, 50, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000 Acting Type: Double Acting
Operating Pressure Range: 0.1 To 1.0 MPa Proof Pressure: 1.5 MPa
High Light:

Pneumatic Cylinder 63mm Bore 200mm Stroke

,

Pneumatic Air Cylinder Airtac

,

Airtac SI63X200

Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke

 

Standard pneumatic cylinders allow standardized machine layouts and guarantee high availability in combination with a wide range of mounting options. The range extends from Mini and round cylinders (Ø8-25 mm, ISO 6432) via short-stroke and compact cylinders (Ø16-100 mm, ISO 15524 and ISO 21287) up to Profile and tie rod cylinders (Ø32-320 mm, ISO 15552 and NFE 49-001).

 

Innumerable design variants and sizes in the different cylinder series make it easy for the user to select the most suitable cylinder solutions for his specific application. The broad range of cylinders allows the cylinders to be specifically chosen, not only the basis of function and quality, but also under strict cost considerations.


Specifications of SI Series Pneumatic Cylinder:

Bore Size (mm) 32 40 50 63 80 100 125 160 200
Acting Type Double Acting
Fluid Air (to be filtered by 40μm filter element)
Mounting Type SI Basic FA FB CA CB LB TC FTC TCM1 TCM2
SID, SIJ Basic FA LB TC FTC TCM1 TCM2
Operating Pressure Range 0.1 to 1.0 MPa (1.0 to 10.0 bar) (15 to 145 psi)
Proof Pressure 1.5 MPa (15 bar) (215 psi)
Temprature (℃) -20 to +80
Speed Range (mm/s) 30 to 800 30 to 500
Cushion Type Variable cushion
Adjustable Cushion Stroke (mm) 27 30 36 40 50
Port Size 1/8'' 1/4'' 3/8'' 1/2'' 3/4''


Stroke of SI Series Pneumatic Cylinder:

Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke 0


Symbol of SI Series Pneumatic Cylinder:

Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke 1
 
Ordering Code of SI Series Pneumatic Cylinder:
Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke 2


Criteria for selection: Cylinder thrust:
Pneumatic Air Cylinder Airtac Type SI63X200 63mm Bore 200mm Stroke 3

 

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

 

Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

 

Welcome to your any question and inquiry!

Contact Details
Ningbo Brando Hardware Co., Ltd

Contact Person: Brandon

Tel: +8613454729544

Send your inquiry directly to us
Best Products
Other Products