SMC Type Pneumatic Air Lubricator AL1000 AL2000 AL3000 AL4000 AL5000 AL6000

SMC Type Pneumatic Air Lubricator AL1000 AL2000 AL3000 AL4000 AL5000 AL6000

Filter, regulator, and lubricator (FRL) compressed air systems are used to deliver clean air, at a fixed pressure, and lubricated (if needed) to ensure proper pneumatic component operation and increase their operation lifetime. The air supplied by compressors is often times contaminated, over pressurized, and non-lubricated meaning that an FRL unit is required to prevent damage to equipment. Filters, regulators, and lubricators can be bought individually or as a package depending on what is needed to ensure the proper air specifications are being met for downstream equipment.

* Filters: remove water, dirt and other harmful debris from an air system. This is often the first step in improving the air quality.

* Regulators: adjust and control the air pressure of a system to ensure that down-line components do not exceed their maximum operating pressures. This is the second step in the FRL system.

* Lubricators: reduce the internal friction in tools or equipment by releasing a controlled mist of oil into the compressed air. This is often done last and/or right before the component needing lubrication.

Specification of SMC Type Pneumatic Filter Regulator Lubricator:

Dimension of SMC Type Pneumatic Filter Regulator Lubricator:

Combination of SMC Type Pneumatic Filter Regulator Lubricator:

BRANDO Supply Filter Regulator Lubricator:

Filter Regulator Lubricator Airtac Type	Filter Regulator Lubricator SMC Type	Filter Regulator Lubricator Festo Type

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!