Airtac Type Air Pilot Pneumatic Valve 5/3 Way 4A130C-M5 4A130E-M5 4A130P-M5

Airtac Type Air Pilot Pneumatic Valve 5/3 Way 4A130C-M5 4A130E-M5 4A130P-M5

A pilot valve is on duty to control a limited-flow control feed to a separate piloted valve. They can also be used in conjunction with solenoid valves. Piloted air valves offer a high level of control over an increased flow feed, negating the need for a much larger force.These valves are more powerful than electrical solenoids or actuators. This makes them ideal for remote and miniature applications where you need higher airflow or lower power.

Double Pilot valve can be used to isolate and simultaneously bypass a passage way for the fluid which for example should retract or extend a double-acting cylinder. There are variety of ways to have this valve actuated. Commonly using a solenoid valve, a lever can be manually twist or pinch to actuate the valve, an internal or external hydraulic or pneumatic pilot to move the shaft inside, sometimes with a spring return on the other end so it will go back to its original position when pressure is gone, or a combination of any of the mention above.

Technical Data of 4A100 Series Pneumatic Air Pilot Valve:

Dimension of 4A130C-M5 Pneumatic Air Pilot Valve:

Production Video of BRANDO Pneumatic Valves:

More Pneumatic Products for you to choose:

2/2 Way Pneumatic Valves	3/2 Way Pneumatic Valves	5/2 Way Pneumatic Valves	5/3 Way Pneumatic Valves
Namur Solenoid Valves	Air Pilot Valves	Pneumatic Cylinders	Silencers and Fittings

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!