|Place of Origin:||NINGBO CHINA|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Inner Box, Carton, Pallet|
|Delivery Time:||4-7 days|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
|Supply Ability:||80000 pieces per month|
|Name:||ASCO Type SCG353A050 Diaphragm Valve||Port Size:||2''|
|Connection:||Female Thread (G, BSPP)||Voltage:||24V DC, 24V/50Hz, 115V/50Hz, 230V/50Hz|
|Pressure:||0.3 MPa-0.8 MPa||Actuator:||Integral Piloted|
|Membrane Material:||Nitrile (Common)||No Of Membrane:||2|
SCG353A050 2'' DN50 ASCO Type Pulse Jet Dust Collector Solenoid Valve 24V DC 110V AC 220V AC
The dust cleaning device of the bag filter comprises: a dust collector pulse solenoid valve, a blowing pipe, a gas storage bag, an inducer, a filter material and a control device; the two ends of the pulse valve are respectively connected with compressed air and a blowing pipe, and the blowing pipe performs a plurality of blowing to clear gray. The blowing system and the compression piping system include a gas storage tank, a blowing pipe and the like, and the gas storage tank is a device for providing compressed air for storage, and has a certain strength, first inputting a human electric signal, so that the diaphragm is in a standby state, utilizing The air pressure causes the diaphragm to vibrate and close. The air compressed by the compressed air system requires dry air and cannot contain oily substances, which may cause certain damage to the bag filter.
YouTube video of SCG353A050 ASCO Replacement Pulse Jet Valve:
Overall dimension of G2'' SCG353A050 Dust Collector Solenoid Valve:
Part details of SCG353A050 ASCO Type Dust Collector Pulse Valve:
Technical parameters of 353 Series ASCO Replacement Diaphragm Valve:
Tips: All related accessories are also sold, like Pulse Controller, Diaphragm, Solenoid Coil and Armature Assembly.
Dust Collector Diaphragm Valve On Reverse Pulse Jet System:
Impact of pulse solenoid valve on dust collector:
The most widely used backflushing system in dust removal equipment is pulse backflushing, which has become a strong guarantee for the normal operation of the entire dust collector system. The cleaning method is mainly based on the principle of back blowing air pressure, which has good cleaning effect and high degree of automation. Although pulse backflush technology is widely used, it still has many disadvantages. First, the backwashing process generates strong vibrations, causing the backwashing pipe to withdraw from the mounting buckle, and the dust collection chamber inside and outside the card is released. The pressure difference in the dedusting chamber is constantly increasing, and the dedusting effect is reduced. At the same time, the pulse backflushing has the characteristic of continuously compressing air to realize the auxiliary pulse injection operation. When the dust removal system suddenly stops compressed air, a large pressure difference is likely to occur and the time will be long. The bag was very damaged. When the moisture content in the compressed air is large, the bag will become wet, and small carbon powder will adhere to the bag, which affects its breathability. The solenoid valve of the backwash system will also be affected. The control functions of the pulse valve and off-line valve will be lost, the backwash effect will be greatly reduced, and the dust removal effect will be reduced.
Contact Person: Echo