|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Price:||$3-$8 per set|
|Packaging Details:||Inner Box,Carton,Pallet|
|Delivery Time:||4-7 days|
|Payment Terms:||L/C, T/T, Western Union,Paypal|
|Supply Ability:||165000 pieces per month|
|Port Size:||DN25; G1'' Inch||Media:||Compressed Clean Air|
|Application:||Bag Filter Dust Suppression System||Power:||Pneumatic, Solenoid|
|Type:||Normal Close||Body Material:||Aluminum Die-casting|
DN25 1'' Inlet Port 8353G006 In Line Type Pulse Jet Diaphragm Valve DC24V/AC220V
The setting of the 8353G006 pneumatic pulse jet diaphragm valve is very important for the dust removal operation of the filter.The boiler bag filter moves the dust-containing gas from the draft tube into the hopper of each unit. After the large particle dust is separated under the guidance of the ash bucket diverting system, it falls directly into the ash hopper, and the remaining dust enters the intermediate tank filtration zone along with the airflow. The filtered cleaning gas passes through the filter bag and passes through the upper tank, the poppet valve and the exhaust pipe. As the filtration progresses, when the dust on the surface of the filter bag reaches a certain amount, the cleaning valve closes the poppet valve according to the set procedure, opens the electromagnetic pulse valve to blow the air, removes the dust on the filter bag, and falls into the ash bucket.
Technical parameter of DN25 8353G006 In Line Pulse Jet Diaphragm Valves:
|Relative Humidity||≤ 85%|
|Fluid||Compressed clean dry air|
|Voltages||AC110V/AC220V/DC24V or OEM|
|Membrane Lifes||More than 1,000,000 times|
|Nominal Port Sizes||G1"||G1-1/2''|
Overall dimension of 24V DC1'' Inlet 8353G006 Pulse Jet Solenoid Valves:
Main part of aluminum die casting 8353G006 Pulse diaphragm solenoid valves:
Reverse Jet Baghouse with 220V AC 8353G006 Electromagnetic Pulse Jet Air Valves:
Electric furnace dust collection equipment with 8353G006 pulse jet diaphragm valves:
The electric furnace dust collector poppet valve and bypass valve are of a thin plate type structure. The two valves are controlled by the cylinder, and the main components of the valve cylinder are selected from the two-position five-way solenoid valve with a voltage rating of 24v. The whole valve structure is simple and reliable, the opening and closing speed is fast, and the zero leakage requirement can be achieved when the valve is closed. One or more simultaneous work can be controlled by the PLC, and one or more warehouses can be closed for offline cleaning and offline maintenance.
Many smelting manufacturers do not understand the use of electric furnace dust collectors. The electric furnace dust collector bags are easy to break and can't find faults. I will introduce the requirements of the high-temperature dust collector bags in the process of using flue gas:
1. The temperature of the flue gas should not be lower than 50 degrees. If the flue gas is lower than 50 degrees, the bag and dust of the precipitator will condense. The bag and the ash clam will make the bag of the precipitator hard and brittle and easily break, which will shorten the life of the electric precipitator bag.
2. The temperature of the flue gas is controlled within 280 degrees. If the bag exceeds 280 degrees, the bag will be burned. At present, the bag filter does not exceed the temperature.
The setting of the electric dust collector cleaning system is also very important in the operation of the electric furnace dust collector.
1. The width of the pulse valve of the precipitator cannot exceed 0.3-0.7 seconds. During this period, the dust of the dust collector bag is large.
2. To ensure that the gas volume of the pulse valve of the precipitator is sufficient, the volume of compressed air is not enough to use the cleaning, so the pulse valve cleaning interval must be sufficient.
Welcome to your inquiry!
Contact Person: Echo