|Place of Origin:||China|
|Minimum Order Quantity:||one set|
|Price:||$3-$8 per set|
|Packaging Details:||Inner Box, Carton, Pallet|
|Delivery Time:||4-9 days|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
|Supply Ability:||150000 pieces per month|
|Port Size:||G1-1/2"||Media:||Dry Clean Compressed Air|
|Application:||Bag House Dust Collector||Power:||Pneumatic And Solenoid|
|Pressure:||0.2 MPa~0.8 MPa||Structure:||Diaphragm, Right Angle, Armature|
|Temperature Of Environment:||-5℃~+55℃||Body Material:||Aluminum Die-casting, Alu|
G1-1/2'' In & Out SCG353A047 Bag House Dust Collector Pneumatic Pulse Air Jet Valve
The response time of SCG353A047 bag house dust collector pneumatic pulse air jet valve can be as short as several milliseconds, the action is fast, the power is small, and the size of the solenoid valve is small, which saves space and is light and beautiful. Pulse solenoid valve installation method and precautions as follows:
1. The pulse jet valve is installed perpendicular to the horizontal pipe and the coil is upward. If it is tilted, it cannot be guaranteed to be used normally.
2. The parameters on the pulse solenoid valve should be consistent with the actual use requirements.
3. The arrow on the valve body of the pulse diaphragm valve should be consistent with the flow direction of the medium.
4. In order to ensure the normal use of the pulse solenoid valve, please install a water separator in front of it.
5. In the hazardous environment, in order to prevent electric sparks from causing accidents, pulse valves should be used.
6. Please thoroughly purge the air bag and pipeline before installation to avoid the malfunction of the pulse valve caused by foreign matter damage to the diaphragm.
7. When the pulse valve fails, it is recommended to install a bypass (bypass) device for timely isolation and easy maintenance.
8. When the electromagnetic pulse valve is not installed temporarily, the indoor rotor pump without corrosive gas should avoid open storage as much as possible.
Technical parameter of G1 1/2'' inch port SCG353A047 Pulse jet solenoid valve:
|Port sizes (Inch)||G3/4''||G1''||G1-1/2''||G2''||G2-1/2''|
|Environment temperature||-5℃-55℃ or OEM|
|Operating medium||Compressed air|
|Protection class||IP 65|
|Service life||Over one million times|
|Voltage||AC110V/AC220V/DC12V/DC24V or OEM|
Main dimension of SCG353A047 Normally Close Pulse Diaphragm Valve:
Reverse jet dust collection system with SCG353A047 Solenoid Pulse Air Valve:
Production place display of SCG353A047 aluminum body pulse jet diaphragm valve:
Pulse bag filter with SCG353A047 pneumatic pulse jet valve:
The characteristics of the low-pressure pulse bag filter: the filter bag is oval, supported by the anti-smash bag, and the number of dust filter bags are arranged in a concentric arrangement to form a dust removal unit. The inlet and outlet flapper door of each dust removal unit can be designed in the body of the dust collector, and can also be designed to be installed outside the body of the dust collector. The flue gas is evenly distributed from the lower part of the precipitator to the outside of the filter bag, and the filtered clean flue gas is discharged from the filter bag to the upper clean flue gas chamber, and then discharged through the outlet baffle door.
Each dust removal unit is equipped with a cleaning device (including a pulse gas storage tank, a solenoid valve, a diaphragm pulse valve and a reverse blower branch pipe), and the rotating reverse blower branch pipe is rotated by a driving motor at the top (rotation speed is about 1 rpm) There is an air nozzle on the air duct (the uniformity of the air blow is taken into consideration when designing the nozzle, and one pulse nozzle is arranged above each bag circle). The low-pressure compressed air (0.06-03.08Mpa) is supplied by the Roots blower, which firstly pumps the gas to the gas collection tank and then delivers it to each pulse gas storage tank through the gas pipeline.
The dust collector is cleaned by online backflushing and is executed by the PLC control unit. When the PLC control device issues a clearing command, the diaphragm pulse valve opens rapidly under the action of the solenoid valve, and the low-pressure compressed air enters the rotating reverse blower branch pipe, and the filter bag is back-flushed and cleaned through the nozzle. Its cleaning is based on the low-pressure air entering the filter bag, so that the filter bag is deformed and dusted.
Welcome to your inquiry!
Contact Person: Echo