|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Price:||$3-$8 per set|
|Packaging Details:||Inner Box, Carton, Pallet|
|Delivery Time:||4-7 days|
|Payment Terms:||L/C, T/T, Western Union,Paypal|
|Supply Ability:||185000 pieces per month|
|Port Size:||G1-1/2"||Media:||Compressed Air|
|Application:||Jet Pulse Filter Accessories & Spare Parts||Power:||Solenoid, Pneumatic|
|Pressure:||0.3MPa~0.6MPa||Structure:||Piloted Operated Diaphragm Valve|
|Temperature Of Media:||-5℃~+55℃||Type:||Normal Close|
|Body Material:||Aluminum Die-casting||Voltage:||AC110V/AC220V/DC24V|
G1-1/2'' Threaded Dresser Nut Port CA45DD Pneumatic Pulse Air Valve For Jet Pulse Filter
When the CA45DD pneumatic pulse air valve is used, the previous environmental premise is very important, which is related to whether CA45DD pulse jet diaphragm valve can run normally and smoothly.
CA45DD pulse solenoid valve environmental premise:
1. The high and low temperatures of the environment should be selected within the scope of the agreement. If there is a difference, special orders should be made.
2. The rated current and power consumption should be selected according to the power supply capacity. It should be noted that the VA value is higher when the AC starts, and the indirect guided solenoid valve should be preferred when the capacity is insufficient.
3. According to the type of power supply, select AC and DC solenoid valves. Generally speaking, the AC power supply is convenient.
4. Use in aggressive or explosive environments should be based on safety requirements.
Technical information of G1 1/2'' inch port CA45DD pulse air valve pneumatic valves:
|Fluid||Compressed clean air|
|Voltage||AC110V, AC220V, DC24V, or customized|
|Membrane Life||More than 1000000 times|
|Nominal Port Size||G1"||G1-1/2''|
Overall dimension of CA45DD right angle pulse flow solenoid valve:
Main part and material of CA45DD pulse jet diaphragm valve for jet pulse filter:
|Solenoid coil||Enamelled wire|
|Armature assembly||SS304, 430FR|
|Small common cap||ADC Aluminum (die cast)|
|Diaphragm||NBR (nitrile, buna-n)|
|Top end cap||ADC Aluminum (die cast)|
|Seal||NBR, Viton, or customized|
|Main body||ADC Aluminum (die cast)|
Other CA series right angle type pulse jet valves for you to choose:
Injection time and period of pulse bag filter with CA45DD pulse jet solenoid valve:
The pulse bag filter can extend the blowing time within a certain range, and the amount of compressed air injected into the filter bag and the amount of induced air can be increased to obtain a better cleaning effect. When the injection pressure is 200~700kPa, the spraying time is 0.3~0.1s, usually 0.15s; if the spraying time is extended, the resistance of the filter bag after spraying is reduced little, which has no obvious effect on the cleaning effect. Instead, it increases the consumption of compressed air, resulting in wasted energy.
The length of the blowing cycle is generally determined by the filtering wind speed, the inlet dust concentration or the net dust of the inlet dust, the blowing pressure, and the running resistance of the precipitator. When the injection pressure is constant, if the filtering wind speed is large, the inlet dust concentration is high, and the blowing cycle can be shortened, so as to keep the resistance of the dust collector from increasing too much. However, in order to save energy, reduce the amount of compressed air and prolong the service life of the wearing parts of the pulse valve, the blowing cycle can be extended as long as the equipment allows.
Welcome to your inquiry!
Contact Person: Echo