|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Inner Box,Carton,Pallet|
|Delivery Time:||4-7 days|
|Payment Terms:||T/T, Western Union, L/C, MoneyGram, D/P, D/A|
|Supply Ability:||185000 pieces per month|
|Port Size:||G2 1/2'' Inch||Material:||Aluminum(Die Cast)|
|Application Field:||Dedusting System In A Cast House||Power:||Pneumatic,Solenoid|
|Pressure:||2-6 Bar||Structure:||Double Diaphragm Solenoid Valve|
|Temperature Of Environment:||-25-60℃||Voltage:||DC12V, AC110V, AC220V, DC24V|
DN65 DMF-Y-62S Pneumatic Pulse Diaphragm Valve For Dedusting System In Cast House
The structure of DMF-Y-62S embedded pulse jet valve is basically the same as the DMF-Z series right-angle pulse valve, except that there is no air inlet, and the air bag is used as its lower air chamber.
The working principle of DMF-Y-62S submerged pulse valve:
When the pulse valve is not energized, the gas passes through the constant pressure pipe of the upper and lower casings and The orifice enters the decompression chamber. Since the valve core blocks the pressure relief hole under the action of the spring, the gas will not be discharged, so that the pressure of the decompression chamber and the air bag are consistent, and under the action of the spring, the diaphragm will be blown. Blocked, the gas will not rush out.
When the pulse valve is energized, the valve core is lifted up by the electromagnetic force, the pressure relief hole is opened, and the gas is ejected. Due to the action of the constant pressure pipe orifice, the outflow speed of the pressure relief hole is greater than the constant pressure pipe of the decompression chamber. The inflow rate of the gas causes the pressure of the air bag to be lower than the pressure of the lower air chamber, and the gas of the air bag pushes up the diaphragm, opens the air injection port, and performs gas injection.
Detailed product description of DMF-Y-62S aluminum die cast embedded pulse solenoid valve:
|Blowing area (㎡)||8-10||12-16||18-28||27-38||37-65||70-90|
|Inlet Sizes||G1''||G1 1/2''||G2''||G2 1/2''||G3''||G4''|
|Working Pressure||2-6 bar|
|Environment Temperature||-25℃-60℃ Or OEM/ODM|
|Working Medium||Clean air|
|Protection Class||IP 65|
|Service Lifes||Over one million times|
|Voltage||DC12V/DC24V/AC110V/AC220V or OEM/ODM|
Main dimension of DMF-Y-62S electromagnetic pulse valve G2 1/2'' inch Female Thread:
Schematic of pulse jet bag filetr with DMF-Y-62S double diaphragm pulse jet valve DC12V, AC110V, AC220V, DC24V:
Production environment of DN65 DMF-Y-62S Pulse & Solenoid Valve in dust collection bag filtering:
Environmental requirements of DMF-Y-62S electric pulse valve:
The pulse dust collector cleaning unit electromagnetic pulse valve should strictly abide by the environmental requirements when using, and the electromagnetic pulse valve can not run normally and smoothly. The electromagnetic pulse valve environmental conditions:
1. According to the type of power supply, AC and DC solenoid valves are used respectively. Generally speaking, AC power supply is convenient to use.
2. In the environment where the relative humidity is high and there are water droplets and rain, etc., the waterproof solenoid valve should be selected.
3. In the corrosive or explosive environment, the corrosion-resistant solenoid valve should be selected according to the safety requirements.
4. The power supply conditions of the electromagnetic pulse valve.
5. Power supply voltage fluctuations usually use +%10%.-15% AC, DC allow ±%10 or so, if excessive, must take pressure measures or put forward special order requirements.
6. The environment often has vibration, bumps and impacts, etc. should choose special varieties, such as marine solenoid valves.
7. The highest and lowest temperature of the environment should be selected within the allowable range, if there is a tolerance, special orders should be made.
8. The rated current and power consumption should be selected according to the power supply capacity. It should be noted that the VA value is higher when the AC starts, and the indirect guided electromagnetic pulse valve should be preferred when the capacity is insufficient.
9. If the environmental space is limited, please use the multi-function solenoid valve, because it eliminates the bypass and three manual valves and is convenient for online maintenance.
10. The voltage specification should be used as much as possible AC220V, DC24V.
Welcome to your inquiry!
Contact Person: Echo