|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 pc|
|Delivery Time:||5work days|
|Payment Terms:||L/C, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||9000 pcs per month|
|Port Size:||2" In 1 1/2" Out||Material:||Aluminum|
2" Inch In Size Flange Pulse Jet Valve Aluminum Solenoid Valve CA45FS/RCA45FS
CA45FS Pulse Jet Valve belongs to flange installation.Flange installation is to fix two pipes, pipe fittings or equipment on a flange, and between the two flanges, with flange pads, bolted together to complete the connection. Flange installation is an important connection method for pipeline construction. The flange connection is easy to use and can withstand large pressures. Flange connections are widely used in industrial piping.
1.all aluminum body
2.full copper coil
3.high quality diaphragm
|Working medium||Clear Air|
|Ambient Temperature||for -5~50°C|
|Diaphragm material||NBR(Nitrile) or VITON (NBR for -5~80°C; VITON for -5~230°C)|
|Diaphragm life cycles||can work more than 1 million cycles|
Dimension Drawing of Pulse Valve
Solenoid valve definition
The pulse valve is controlled by a pilot valve such as electromagnetic or pneumatic, and can open and close the diaphragm valve of the high-pressure gas source to generate a pulse.
Electromagnetic pulse valve: refers to a diaphragm valve that combines a solenoid valve, a pilot valve and a pulse valve and is directly controlled by an electric signal.
The electromagnetic pulse valve (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag type dust collector cleaning system. Controlled by the output signal of the pulse blowing controller, the filter bag is sprayed and cleaned row by row (room), so that the resistance of the dust collector is kept within the set range to ensure the processing capacity and dust collection efficiency of the dust collector.
Electromagnetic pulse valve working principle
The diaphragm divides the electromagnetic pulse valve into two front and rear air chambers. When the compressed air is turned into the rear chamber through the orifice, the rear chamber pressure closes the diaphragm to the output port of the valve, and the electromagnetic pulse valve is “closed”. "status. The electric signal of the pulse blowing control device disappears, the armature of the electromagnetic pulse valve is reset, the venting hole of the rear air chamber is closed, and the pressure of the rear air chamber is raised to make the diaphragm close to the valve outlet, and the electromagnetic pulse valve is in the "closed" state.
The electromagnetic pulse input terminal (IN) is connected with the metal tube of the gas storage cylinder, and the output end thereof is connected with the spray box of the dust box, and the connection thread is tightly sealed with the tetrafluoroethylene raw material belt.
please care the products details at our website, any confuse please contact us or Note your request online. Big quantity purchase ,please contact our online service to ask more economic shipping way or discuss the more pretty price.
Wait your inquiry!
Contact Person: Brandon