|Place of Origin:||China|
|Minimum Order Quantity:||1PC|
|Delivery Time:||7 working days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||100000PCS PER MONTH|
|Type:||Electromagnetic Pneumatic Pulse Valve||Specification:||1 Inch|
|Material Of Body:||Aluminum Alloy||Media:||Air|
|Voltage:||At Your Request Or Working Condition||Material:||Aluminum|
Electromagnetic Pneumatic Pulse Valve CA25T Square Diaphragm 1 Inch Pipe Size Injection of 1 million or more
This is classical Goyen type CA25T. The voltage for DC,AC and even customized are available.
Steady working pressure and efficiency for 0.3-0.8MPa.
The Z-type pulse valve is a right-angle valve with an angle of 90° between the inlet and outlet. It is suitable for the installation link between the air bag and the blow pipe. The air flow is smooth and can provide the required cleaning gas pulse.
Below excel is the complete size of products(Goyen type) that we can provide
|15 = G1/2"|
|20 = G3/4"|
|25 = G1"|
|35 = G1-1/4"|
|40 = G1-1/2"|
|50 = G2"|
|62 = G2-1/2"|
|75 = G3"|
|76 = G3"|
|89 = G3"|
|102 = G4"|
Detailed data for your reference
|Ambient Temperature||-25~60℃ Customized for lower or higher temperature|
|Working Medium||Clean Air|
|Diaphragm Life||Over One Million Cycles|
|Cv/Kv||Call us for detail|
Drawings wtih CA25T
And you can see the corresponding Diaphragm as follows
We always supply the superior quality with competitive prices
Further description of Goyen type Pulse Valve
Pulse valve is composed of pilot head, diaphragm and valve aluminum body. The back cavity area of diaphragm is bigger than the front one. The diaphragm is kept at the closed position due to the effect of big pressure.
Electrical pulse controller send input signals so that the electromagnetic armature attracts the moving bar. Open the balancing hole to release the pressure gas in the back cavity of diaphragm quickly; the pressure gas in the front cavity holds up the diaphragm to open the passage and the valve starts cleaning.
The pulse signal disappears and the spring of the armature works immediately to resume the moving bar so as to close the balancing hole. The pressure gas in the back cavity of the diaphragm and the spring work together to close the passage the valve stops cleaning.
The damping hole in the diaphragm functions to damp the airflow when the moving bar of armature holds up for balancing and to transit the air to the back cavity as soon as the balancing hole is shut to close the passage and stop cleaning.
Performance and cost-effectiveness are essential for dust collector systems
dust collector systems in a wide range of industries, including the following:
Grain, Agriculture and Feed
Metal Working (Abrasive Blasting)
FRL ,Brass Valve , Pneumatic Solenoid Valve
06=1/8 08=1/4 10=3/8 15=1/2 OR 01=1/8 02=1/4 03=3/8 04=1/2 06=3/4 08=1
Angle Seat Valve,Pulse Valve , Mechanical Valve ,Pneumatic Silencer
06=1/8 08=1/4 10=3/8 15=1/2 20=3/4 25=1 32=1-1/4 40=1-1/2 50=2 65=2-1/2 80=3
Needle Valve ,Pneumatic Fitting :01=1/8 02=1/4 03=3/8 04=1/2 06=3/4 08=1
Ball Valve :04=1/8 06=1/4 08=3/8 15=1/2 20=3/4 25=1 32=1-1/4 40=1-1/2 50=2
Check Valve :08=1/4 10=3/8 12=1/2 16=3/4 20=1 25=1-1/4 30=1-1/2 40=2
ANY QUESTION WILL BE WELCOME!
Contact Person: Echo