|Place of Origin:||China|
|Minimum Order Quantity:||1Pcs，Sample Available|
|Packaging Details:||inner boxes,cartons,pallets|
|Delivery Time:||one week after payment|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||100000 pcs per month|
|Specification:||G3''||Volume:||24V DC,110V 220V AC|
Aluminum Dust Collector Pneumatic Pulse Valve DMF-Y-76S,3.2KG,24DC,3Inch
The submerged electromagnetic pulse valve is the compressed air "switch" of the dust removal and injection system of the pulsed bag dust remover. Controlled by the output signal of the pulsed jet control instrument, the filter bag is sprayed to clear the dust one row at a time (chamber) to keep the pressure of the bag dust remover within the set range to ensure the processing capacity and dust removal efficiency of the dust remover.
-40 to 100℃, use normal diaphragm
-30 to 200℃ use high temperature diaphragm
|Using Age||Over 1 million cycles|
The Drawings of SBFEC type Pulse Valve for your reference
Our monthly production reaches 100000pcs
We supply actual and valid Cettificate of Origin
About The Installation:
1. Check whether the components are damaged during transportation before use.
2. Before installation, clean up the sundries in the air supply pipeline through ventilation. Pay attention to the direction of gas flow and whether the connection pipe is correct during installation.
3. All o-rings shall be lubricated with suitable lubricant during installation.
4. There are three pins in the solenoid pulse valve coil, and it is equipped with a special plug. One of the pins with the "" symbol is the ground pin, and the user can decide whether to ground or not according to needs. (in general, it is not grounded when the voltage is less than 36V, and it should be grounded when the voltage is greater than 36V.) The other two are coil power pins, which are respectively connected with the terminals corresponding to the sequence of the pulse injection controller and the terminals with the common line of the valve. Note whether the voltage meets the requirements.
The capacity of the air separator shall meet the requirements of providing a stable air source for the electromagnetic pulse valve. The inner wall of the air separator shall be clean and free from rust and other sundries. The air separator shall be free from leakage and shall meet all safety requirements.
6. The valve is connected to the gas bag and blowing tube seal suitable temperature for - 10 ℃ ~ 70 ℃. For high temperature seals, please specify when ordering.
A: threaded connection
B: the intubated submerged pulse valve is the diaphragm that divides the pulse valve into the front and rear Chambers. When the compressed air is connected, the compressed air enters the rear chamber through the air hole. At this time, the pressure in the rear air chamber will press the diaphragm against the air outlet of the valve, and the pulse valve is in the closed state.
Advantages of BFEC pulse valve:
1, Complete range of high efficiency diaphragms pulse jet valve of 3/4", 1", 1 1/2", 2", 2 1/2", 3"
2, suitable for all types dust collector
Welcome your enquiry, we also can OEM pulse valve as per your special demands. You can call us, or email us, we will response at once.
Contact Person: Echo