|Place of Origin:||CHINA|
|Minimum Order Quantity:||1Pc|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram, D/A|
|Pipe Size:||1.5 Inches||Weight:||1.15Kg|
Submerged Pneumatic Pulse Valve 1.5 Inches Dust Removal Durable Solenoid Valve DMF-Y-40S
The submerged electromagnetic pulse valve is directly mounted on the air distribution box and has the characteristics of small resistance, good flowability and high injection volume.Expanded the use of air source pressure,So it is suitable for use in places where the pressure of the air source is wide.
Product parameters of DMF-Y-40S
|Model number||DMF-Y-40S||Material||ADC12 Aluminium|
|Pipe Size||G1 1/2"||Pilot assembly||430FR Stainless Steel|
|Blowing Area||12-16㎡||Diaphragms||Nitrile Rubber|
|Number of diaphragms||2 tablets||Life||5 Years|
DMF-Y Series Specifications
|Use medium||Dry clean compress air|
|Diaphragm life||Injection of 1 million or more|
Submerged electromagnetic pulse valve working principle:
The diaphragm divides the electromagnetic pulse valve into two front and rear air chambers. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the air chamber pressure closes the diaphragm assembly to the output port of the valve. In the "off" state
The electric signal of the pulse blowing controller causes the electromagnetic pulse valve to move backward, the air vent hole of the air chamber is opened, the air chamber quickly loses pressure, the diaphragm assembly moves backward, and the compressed air is blown through the valve output port, which is “opened”. "status.
The electric signal of the pulse blowing control device disappears, the submerged electromagnetic pulse valve is reset, the rear air chamber vent hole is closed, and the rear air chamber pressure is raised to make the diaphragm assembly close to the valve output port, and is in the "closed" state.
If you have any questions about our products,Please contact us!
Contact Person: Decade